Hello,
I've recently installed one Dahua NVR and several Dahua cameras, this is the first time I use such kind of equipment.
First I tried to setup MD (Mouvement Detection): it worked fine but I had a lot of false alerts.
So I decided to switch to IVS instead of MD.
My NVR is a DHI-NVR5208-8P-4KS2E and all my cameras are DH-SD1A404XB-GNR.
From their technical specs, they are IVS-compatible.
So, from the NVR Web interface, I enabled IVS for each camera by using the "Intrusion" function, I drew the lines, set the max/min target size and enabled IVS recording 24/7 both at the camera setting level and at the NVR storage level.
But... it doesn't work.
I walked several times through the Intrusion zone and no video was recorded by the NVR (and no mail alert too - I enabled this function too).
What could be wrong with my setup?
Thanks.
I've recently installed one Dahua NVR and several Dahua cameras, this is the first time I use such kind of equipment.
First I tried to setup MD (Mouvement Detection): it worked fine but I had a lot of false alerts.
So I decided to switch to IVS instead of MD.
My NVR is a DHI-NVR5208-8P-4KS2E and all my cameras are DH-SD1A404XB-GNR.
From their technical specs, they are IVS-compatible.
So, from the NVR Web interface, I enabled IVS for each camera by using the "Intrusion" function, I drew the lines, set the max/min target size and enabled IVS recording 24/7 both at the camera setting level and at the NVR storage level.
But... it doesn't work.
I walked several times through the Intrusion zone and no video was recorded by the NVR (and no mail alert too - I enabled this function too).
What could be wrong with my setup?
Thanks.