Help terminating Alhua camera

dsabot

n3wb
Joined
Nov 1, 2015
Messages
29
Reaction score
1
Hi. I have an Alhua camera whose female connector is broken. I cut the wire to try and re-terminate it, but there are only 6 wires and the colors are weird:

orange
Blue

purple
Brown

yellow
Gray

many help would be appreciated.
71CCE173-2A29-450D-94E1-2A27486A474C.jpegDCAB4222-5AA2-4CB3-B47A-868A62D1B934.jpeg
 

bp2008

Staff member
Joined
Mar 10, 2014
Messages
12,680
Reaction score
14,038
Location
USA
It is actually spelled "Dahua". Funny logo I know.

Get a multimeter and measure continuity between the pins in the RJ45 connector and the wires on the back of the connector. Write each one down as you go, and you will know for sure what the pinout is.
 

bp2008

Staff member
Joined
Mar 10, 2014
Messages
12,680
Reaction score
14,038
Location
USA
If you don't have a multimeter, you can try this: [link removed; it was definitely wrong]

But know that if you get it wrong, you could fry the camera by providing power where it should not be.
 

bp2008

Staff member
Joined
Mar 10, 2014
Messages
12,680
Reaction score
14,038
Location
USA
Here is a place where someone confirmed the pinout. Just make sure you understand RJ45 pin numbering.


Brown = pin 1
Purple = pin 2
Orange = pin 3
Yellow = pin 4+5
Blue = pin 6
Grey = pin 7+8
 
Top