help with settings

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
hello I recently had to recreate my hwf 5231 z12e lpr. the camera is producing a blur near the car tires and a trailing blur from the rear of the car. attached are my settings and a picture of the blur. any suggestions on how to correct the picture would be appreciated.
 

Attachments

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
thank you its just switched to night mode so I can't check if the Lower NR worked. I think you are correct because in night mode my NR advanced 2d is o and advanced 3d is 48 and the night picture is perfect. Thanks again for the quick response. should I adjust the advanced 3d as well or just the 2d to 20
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,428
Reaction score
47,550
Location
USA
I would adjust them both down to the 20s. That should clean that up. At least you were still getting clean plates!
 

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
thanks I will bring them both down to 20 to start and correct more if necessary
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
17,012
Reaction score
47,462
Location
Floriduh
Might want to consider getting rid of “Auto” exposure. It rarely works well. For daytime try a custom range of 0-2 or 0-4
 
Top