Hi All!

[secureyourhome]

I am switching all my cameras to reolinks. The quality and price are awesome. I am having issues in Blue Iris though. Using the reolink utility I get clear picture with no lag or issues. I want to use Blue Iris as I paid for it. In Blue iris I get the following;




These are my settings in Blue Iris



I have trigger and record off.


Thanks!

 

[fenderman]

@secureyourhome There are known issue with reolink and blue iris..there are several threads discussing this.

 

[secureyourhome]

@secureyourhome There are known issue with reolink and blue iris..there are several threads discussing this.

Thanks! Doing this; Helped

Cameras' Interface
1. Make sure the Reolinks are using the most recent firmware released in July.
2. Make sure the Reolinks are set to use "Baseline" in the H.264 profile setting.
3. Turn off 3D-NR.
4. Reboot the cameras.

Blue Iris
1. Set Intel hardware acceleration to "No" in the global settings.
2. Uncheck RTSP/stream timecode in each camera's video settings.
3. Raise the buffer to 20MB in each camera's video settings.

 

[fenderman]

Thanks! Doing this; Helped

Cameras' Interface
1. Make sure the Reolinks are using the most recent firmware released in July.
2. Make sure the Reolinks are set to use "Baseline" in the H.264 profile setting.
3. Turn off 3D-NR.
4. Reboot the cameras.

Blue Iris
1. Set Intel hardware acceleration to "No" in the global settings.
2. Uncheck RTSP/stream timecode in each camera's video settings.
3. Raise the buffer to 20MB in each camera's video settings.

Baseline reduces the image quality. No hardware acceleration increases cpu consumption. Reolink is a poor choice for blue iris.