Hikvision DS-2CD2132-I 4mm Update

[electro]

Hi

I have Hikvision DS-2CD2132-I 4mm Cam and which firmware Can I use to upgrade this 5.2 version to 5.4.5.

Also Can I update this Model (CCWR) directly from upgrade menu or I should use updater like chinese to english? Thanks

 

[alastairstevenson]

which firmware Can I use to upgrade this 5.2 version to 5.4.5

progress through the versions from here :

R0 series DS-2CD2x32x-Ixx IP camera firmware - Updates

www.ipcamtalk.com

Can I update this Model (CCWR) directly from upgrade menu

Yes, that should work OK - if it truly is an EN camera as the screenshot suggests.

 

[electro]

OK thanks I'll try tomorrow. It his is not EN then this can be fixed?

 

[electro]

progress through the versions from here :

R0 series DS-2CD2x32x-Ixx IP camera firmware - Updates

www.ipcamtalk.com

Yes, that should work OK - if it truly is an EN camera as the screenshot suggests.

Can't upgrade. After upgrade started I was unable to use cam from web interface But was able to see video in ivms 4200 and also in sadp tools. Restarted cam and now I am able to enter from web but still have 5.2 firmware.

Can I use this tutorial for this situation? R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

 

[alastairstevenson]

Can't upgrade. After upgrade started I was unable to use cam from web interface But was able to see video in ivms 4200 and also in sadp tools. Restarted cam and now I am able to enter from web but still have 5.2 firmware.

Did you try the update incrementally, not just a single step?

Can I use this tutorial for this situation? R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

That should work - but shouldn't be necessary if the device is not a Chinese camera running hacked firmware.

 

[electro]

Did you try the update incrementally, not just a single step?

Downloaded file from above link and uploaded from configuration > maintenance > Remote Upgrade menu. how upgrade if this is not correct option for upgrade

 

[alastairstevenson]

It's the correct method, but the versions must be applied in stages, in increments.
What version did you update with?

 

[electro]

It's the correct method, but the versions must be applied in stages, in increments.
What version did you update with?

Installed version is 5.2 and I updated to 5.4.5 which downloaded above link. Update fails so which version i can try in stages?

 

[alastairstevenson]

I'd suggest 5.3.0 then 5.4.0 then 5.4.5 then 5.4.41
They are all at that link.

 

[electro]

I'd suggest 5.3.0 then 5.4.0 then 5.4.5 then 5.4.41
They are all at that link.

Thank. successfully updated from 5.2 to > 5.3 and than 5.4. but 5.4.5 is older one than 5.4.41? latest version is 5.4.41?

 

[electro]

I'd suggest 5.3.0 then 5.4.0 then 5.4.5 then 5.4.41
They are all at that link.

So updated cam to 5.4.41 version. this is latest version? On chiense cams I have 5.4.5 version so Can I isntall 5.4.41 version to chinese cams (DS-2CD2132-I ) too?

 

[alastairstevenson]

5.4.5 is ok, the 'Hikvision backdoor' is closed in that version.

 

[electro]

5.4.5 is ok, the 'Hikvision backdoor' is closed in that version.

Thanks problem solved