I recently purchased a (second hand) Hikvision DS-2CD4526FWD-IZH Dome Camera and need to power it with 12VDC, but only see a "AC24V" connection jack. The manual and spec information for this camera indicates it supports 12VDC power (along with 24VAC and PoE supplies), but is not clear where to connect the 12VDC. I am assuming it would be a separate cable from the ethernet cable.
Has anyone else been down this path with the same camera? If so, where exactly would a 12VDC power supply be connected?
I have tested the camera with 24VAC and it appears everything works, and i do plan on going the PoE route, just don't have the PoE NVR yet.
Thanks in advance!
Has anyone else been down this path with the same camera? If so, where exactly would a 12VDC power supply be connected?
I have tested the camera with 24VAC and it appears everything works, and i do plan on going the PoE route, just don't have the PoE NVR yet.
Thanks in advance!