Hikvision DS-9632NI-ST No resource

[marlz827]

Hi all , i have a Hikvision DS-9632NI-ST . At this point i had 16 Ip hikvsion dome cameras working for about a year now .

We recently installed 6 more cams that have h.265 . When i plug them in they work fine . After some time the nvr starts to bug out and random cams start showing no resource . Then a reboot they all start working then the same issues . I took them down and installed 6 older dome cams and the NVR shows all the new cams plus the old and no resource issues and works fine . Is there some sort of setting i am missing with the newer cams?

The new cams in question are DS-2CD2185FWD-I

Any ideas would be great thanks again

 

[alastairstevenson]

What is the total bitrate of the 16+6 new cameras, and the 16+6 older ones?
The NVR specification shows only 80Mbps input capability:

Network bandwidth
Up to 80Mbps input, 160Mbps output, up to 128 network streams

You are likely exceeding what the NVR can handle, hence 'No Resource'.

 

[marlz827]

When i bought it they told me that its
Network
Incoming bandwidth: | 200Mbps
Outgoing bandwidth: | 160Mbps
DS-9632NI-ST-Hangzhou Hikvision Digital Technology Co. Ltd.

Right now its at 90mbps and working fine , I would have to plug in the new cams . Could it be the h.265 coding that is making it all go crazy?

 

[alastairstevenson]

When i bought it they told me that its
Network
Incoming bandwidth: | 200Mbps
Outgoing bandwidth: | 160Mbps

Well, that's certainly more like what you'd expect as the rating for a 32 channel NVR.
But it seems that there is some inconsistency in Hikvision's published specs - this is where I quoted the figure from : www.hikvision.com/UploadFile/image/2013110803091859867.pdf

 

[marlz827]

I noticed it says nothing bout h.265 I wonder if it could cause the nvr to bug out