U-Boot 2010.06-svn18487 (Nov 11 2017 - 13:44:08)[V1.4.5]
PHY reset timed out
Hit ctrl+u to stop autoboot: 0
### CRAMFS load complete: 3415512 bytes loaded to 0x82000000
## Booting kernel from Legacy Image at 82000000 ...
Verifying RSA ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Tue Dec 29 09:40:02 UTC 2020
Starting udev: [ OK ]
sdbg: serverip:192.0.0.128
fastboot is
language is 1
devtype is ab57
/
----------<1> tar guir webs ----------
BusyBox v1.2.1 Protect Shell (psh)
Enter 'help' for a list of davinci system commands.
MAC ioctl error!
# ----------<2> show logo ----------
mv: can't rename '/home/app/exec/ss': No such file or directory
chmod: /dev/ttyS3: No such file or directory
read: pDevCfg->cfgHead.paraVersionis [0x170816];
read: iCkSum is [0x82d]; pDevCfg->cfgHead.paraChecksum is [0x82d]
ERROR this is a new device, please check!!
scriptCmd: ./load -i 0.
a is ab57
DS_7208HQK_K
mmz allot OK DS_7208HQK_K
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x120F0800: 0x00000170 --> 0x00000038
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x120f084c: 0x00000170 --> 0x00000038
[END]
loadAd tp2823:0,tp2824:0,tp2833C:2,tp2827C:0,nvp6114a:0 nvp6124b:0 nvp6134:0,nvp6134b:0
cmdBuf:insmod extdrv/tp2823.ko
[ 23.722062]
[ 23.722062] [HIKI2C_STATIS]WARNING:i2c-0 operation too often(real:646 max:646)!!!
insert audio
load K72 ok
/
----------<4> del no use res ----------
cp: can't stat '/home/app/hisi/modules/setDebug_mux': No such file or directory
iSCSI daemon with pid=242 started!start savelog proc!!!!!
fun:hisi_main_module_init, line:10423 >>>>>>ATA is Not Scan Done! Please Wait<<<<<<
fun:hisi_main_module_init, line:10423 >>>>>>ATA is Not Scan Done! Please Wait<<<<<<
fun:hisi_main_module_init, line:10423 >>>>>>ATA is Not Scan Done! Please Wait<<<<<<
fun:hisi_main_module_init, line:10423 >>>>>>ATA is Not Scan Done! Please Wait<<<<<<
pdev_hard_info->ataCtrlNums=2
file:src/pal_api.c,line:566, pal_module_init successfully
[CRIT]read_execl_guide_cfg()1157:start
[INFO]get_flash_cards_info()410:ignore [msmouse].
[CRIT]get_flash_cards_info()451:
can not find any usb device!
[CRIT]read_execl_guide_cfg()1167:get flash cards info failed. iRet[-1]
read execl guide cfg failed. iRet[-1]/home/app/exec/master: sbus_sub_au.c: 279: au_init: Assertion `0' failed.
