Hikvision Hilook setup - Live View + Decoding

[Duckapu]

Hey guys,

Looking to build a new 8-CH system with Hikvision (only 6 cameras), basically just need 1080p quality and will mostly be using it for live viewing on local monitor (directly to NVR), not so much remote, HDD will be installed for recording. Setup looks like this:
1x NVR-108MH-C/8P
6x IPC-T120

Everything will be used indoors so plastic turret cameras are fine.. Specs on the NVR says:
Live view / Playback resolution
8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/ 2CIF/CIF/QCIF
Synchronous playback
8-ch
Decoding Capability
1-ch @ 8 MP / 4-ch @ 1080p

Will I have any problems live viewing all 6 cameras on 1080p? If 'decoding capability' applies also to live view, what will happen to the other 2 cameras if all 6 are shown on screen?

Datasheet for cameras <--link
Datasheet for NVR <--link

Thanks!

 

[markrobssiii]

Hey guys,

Looking to build a new 8-CH system with Hikvision (only 6 cameras), basically just need 1080p quality and will mostly be using it for live viewing on local monitor (directly to NVR), not so much remote, HDD will be installed for recording. Setup looks like this:
1x NVR-108MH-C/8P
6x IPC-T120

Everything will be used indoors so plastic turret cameras are fine.. Specs on the NVR says:
Live view / Playback resolution
8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/ 2CIF/CIF/QCIF
Synchronous playback
8-ch
Decoding Capability
1-ch @ 8 MP / 4-ch @ 1080p

Will I have any problems live viewing all 6 cameras on 1080p? If 'decoding capability' applies also to live view, what will happen to the other 2 cameras if all 6 are shown on screen?

Datasheet for cameras Datasheet for NVR SIZE]

Thanks!

Under decoding it says 4 @1080...if 6 cameras....u will get blank block says "no resource". Same as when camera is unplugged it says "No Link".

Sent from my SM-G960F using Tapatalk