Hi i am new to this and i am trying to connect 2 lilin cameras onvif compatable to a hikvision nvr that already is running 3 hik vision cameras is there anyone that can help me remotley as i seem not to be getting anywhere ?? i have a tel no it 07747025550 imnot sure if i am allowed to ask these things on here but im just asking thanks
hikvision lilin
- Thread starter icecream
- Start date
alastairstevenson
Staff member
An important piece of information for the NVR configuration is knowing the 'ONVIF Port' for the 'Management port', which may not be port 80.
If the camera manual does not define the 'ONVIF Port' you will be able to find it, and much more, with the very good Windows open-source tool 'ONVIF Device Manager' from sourceforge.net
The ONVIF port shows in the URL at the bottom of the 'Identification' page.
You should also be able to add the camera as a Generic RTSP model.
The required RTSP string shows at the bottom of the 'Live Video' page in ONVIF Device Manager.
Good luck.
If the camera manual does not define the 'ONVIF Port' you will be able to find it, and much more, with the very good Windows open-source tool 'ONVIF Device Manager' from sourceforge.net
The ONVIF port shows in the URL at the bottom of the 'Identification' page.
You should also be able to add the camera as a Generic RTSP model.
The required RTSP string shows at the bottom of the 'Live Video' page in ONVIF Device Manager.
Good luck.