I current have a few of the Hikvision 2332-I cams and 2 are using motion detection, i have found the normal motion detection does false trigger a fair amount no matter what settings i use. I have noticed that there is a Expert configuration on the on the camera and was wondering how this works. when using a NVR, i have the 7616NI.
Normally when i have setup the motion detection i set up the grid on both the camera and the NVR, enable motion detection on both and thats it
What device is doing the detecting the camera or the NVR?
To use the Expert configuration it can only be set on the camera as the NVR does not have the Expert config menu.
How is it set up?
Any help would be much appreciated
Normally when i have setup the motion detection i set up the grid on both the camera and the NVR, enable motion detection on both and thats it
What device is doing the detecting the camera or the NVR?
To use the Expert configuration it can only be set on the camera as the NVR does not have the Expert config menu.
How is it set up?
Any help would be much appreciated