Hikvision No-ip setup

DocD

n3wb
Joined
Feb 3, 2020
Messages
2
Reaction score
0
Location
St. Louis MO
I am working on a friends system a NR51P6-16 nvr running Hikvision V4.21.005 build 190703. Its remote connection is using No-IP to connect. He updated from an old nvr and the new one wouldn’t connect correctly using no-ip.
He could hit it internally using lan IP though.
I did the following
1 - I turned off https and enhanced sdk service
2 - changed Network > basic settings > port > http port to 11111 ( to match his firewall rule and past config)
3 - changed Network > basic settings > Nat > http > external port to 80
Checked firewall rules and 11111, 554, and 8000 are allow.
Once I didn’t this I was not able to access the nvr from the lan IP only the ddns (no-ip) address.

Any thoughts?
 

mikeynags

Getting comfortable
Joined
Mar 14, 2017
Messages
511
Reaction score
310
Location
CT
Has your friend given any thoughts to setting up a VPN for remote access? It’s much more secure than opening ports.


Sent from my iPhone using Tapatalk
 
Top