Hikvision NVR DS-7616NI-I2 - Picture captures

[sfnetwork]

My Hik DS-7616NI-I2 NVR is on latest firmware (4.1.50)
I try using the picture capture on timer to be able to do time lapses.
It works perfectly, it creates the pictures at 1080 and I'm able to do nice time lapses (using Power Director)

BUT....
it seems to stop after 4000 pictures, some kind of limit... I looked everywhere but couldn't find this limit setting.
Not a quota as far as I could see and HD space left...
And the interval options are 3s 4s 5s then jumps to 10m 30m, etc... so 5s is my best option...

Anybody knows something about this?

 

[Securame]

Probably just the web interface is limited to showing you 4000. Try to search for different date/time ranges.

 

[sfnetwork]

Probably just the web interface is limited to showing you 4000. Try to search for different date/time ranges.

no, on the console, I see the same limit...

 

[Securame]

That doesn't mean it is only storing 4000 images. Just that it will only show you 4000 (at a time) when looking them up.

 

[sfnetwork]

That doesn't mean it is only storing 4000 images. Just that it will only show you 4000 (at a time) when looking them up.

yes you're right, I just confirmed that.
The limit seems to be set from the NVR because same thing in Web UI, IVMS, console, etc...
I can see the others if I filter the time more...

Besides, downloading the full day 4000 pictures at the time, any way to download the full day in one task?

 

[sfnetwork]

Also, 5s interval makes a lot of photos, any way to be able to set 10s 15s 20s (the choices jumps to 10m after 5s)?