Hikvision NVR new firmware 3.3.2

[mentax]

Hi gays,

Is anyone try new firmware?
Recently boat DS-7808N-E2/8P from aliexpress, and wondering how can I update a firmware?
When I try to use web interface it said that update is failed =(


Here is a translated description from hikvision Chinese website:

[FONT=&amp][FONT=&amp]Package applies to the following models:[/FONT][/FONT]
[FONT=&amp][FONT=&amp]DS-7804/08 / 16N-E1 , DS-7804N-E1 / 4N , DS-7804N-E1 / 4P , DS-7808/16 / 32N-E2, DS-7808/16 / 32N-E2 / 8N, DS 7808/16 / 32N-E2 / 8P, DS-7816 / E2-32N / 16N, DS-7816 / 32N-E2 / 16P, DS-7908/16 / 32N-E4, E4-DS-7908N / 8P, DS 7916 / 32N-E4 / 16P[/FONT][/FONT]

[FONT=&amp][FONT=&amp]Special Note:[/FONT][/FONT]
[FONT=&amp][FONT=&amp] Version: V3.3.2 build150522[/FONT][/FONT]
[FONT=&amp][FONT=&amp] Equipment upgrades at risk, please be sure to confirm whether to upgrade equipment.[/FONT][/FONT]
[FONT=&amp][FONT=&amp] Make sure that the upgrade package is available for your device.[/FONT][/FONT]
[FONT=&amp] Do not upgrade the device off.

[/FONT]It said that my device is supported, but hell I have no idea how to flash it properly...
Also - maybe someone know - does it support English or only Chinese?

Here is a link http://www1.hikvision.com/cn/download_more_699.html#prettyPhoto

 

[copex]

you will have to use hiktools to change the digicap.dav from CN to EN i recomed you back up the current firmware on the box before you upgrade and keep in mind that at this point in time you can not downgrade easly also defaulting the settings may return the NVR to chinese.

you can find all of the info you need on here just search ;-)

 

[mentax]

Was trying to update firmware using following link:
http://www.ipcamtalk.com/showthread...anguage-extract-files-and-create-own-firmware
Change language from
iLanguage : 0x00000002 [2] CN
to
iLanguage : 0x00000001 [1] EN/ML
using command:
hiktools.exe lang digicap3_3_2.dav 1
Open web browser and trying to update it, but got Upgrading Failed on a web browser.No other information was provided. =( Is it any way to see full log somewhere why this issue happen?
Or maybe is it other way to install this firmware?
P.S Current firmware is 3.0.10

Here is Hardware info:
[root@dvrdvs /] # getHardInfo
Start at 2015-06-08 19:27:05
Serial NO :***************
V3.0.10 build 141126
KernelVersion: V1.0.0 build 140512
dspSoftVersion: V5.0 build 140816
codecVersion: V5.0 build 080808
hardwareVersion = 0xb000
encodeChans = 0
decodeChans = 8
alarmInNums = 0
alarmOutNums = 0
ataCtrlNums = 2
flashsize = 0x10
ramSize = 0x200
networksNums = 2
language = 2
devTypeS-7808N-E2/8P
bootPartition = 2
randomCode = ****

 

[whoslooking]

You will have to tftp it onto the NVR, also you need to use the ML version, and change the flag to 2, if you brought the NVR from China as it's a 7800 you need to use the firmware for a 7608