Hikvision PTZ

T

Tobamory61

n3wb
Jun 4, 2024
6
0
Leeds UK
Guys ive been eyeing up the following model DS-2SE4C425MWG specifically its ability to have a 180 view then instruct the PTZ to sweep round should it detect something while the PTZ element is facing the other way. My questions are

1. Do all the TandemVU range do ANPR or just a specific model if so which Models
2. If i have these going into a NAS either Synology ( Surveillance station ) or QNAP ( QVR Pro ) do i loose features is it best to have them going to a Hik NVR and if so which Model supports these and 4k

Many thanks
 
1717747798901.png


1717747828418.png

This is what i could gather that would support ANPR when you change VCA. But real question is, which model can do both smart event on 180° view camera to trigger ptz also having ptz to do ANPR.
 
trempa92 said:
View attachment 196008


View attachment 196009

This is what i could gather that would support ANPR when you change VCA. But real question is, which model can do both smart event on 180° view camera to trigger ptz also having ptz to do ANPR.
Click to expand...
The 1st and 3rd are the ones im looking at however the 1st is the Flagship i think so pricy, their compare tool doesnt really tell me much. I have emailed them to ask.

I did see a post earlier where a guy can only get the 180 part to trigger lines etc, which in-turn triggers the PTZ to move round, he couldnt however get the PTZ to trigger on its own, which seems weird as it will go 360 degrees so if your covering 180 with the static, surely the PTZ element should detect also if it spots something outside the static cams view...
 
having lines at ptz currently with logic how lines are placed on image is unusable.

Unlike privacy masks that work for x / y cordinates, lines do not, If you draw line crossing over image it will stay at exact same spot wherever camera may rotate or point.

Hence why its probably not possible, even tho i believe you can but VCA have to be changed to smart events, rather than ANPR or Face capture or so whatever camera got
 
trempa92 said:
having lines at ptz currently with logic how lines are placed on image is unusable.

Unlike privacy masks that work for x / y cordinates, lines do not, If you draw line crossing over image it will stay at exact same spot wherever camera may rotate or point.

Hence why its probably not possible, even tho i believe you can but VCA have to be changed to smart events, rather than ANPR or Face capture or so whatever camera got
Click to expand...
Many thanks Trempa

QQ then as you seem to know your tech. If i have a second stock 180 bullet on the house Can you also Link that to the PTZ, or is the Linkage only a 1 to 1 ratio, IE the one thats on the unit take priority

I suppose my example would be Imagine the unit in the middle of a Park and 180 to the front is covered by the integral camera, if you fit a secondary 180 standalone behind the unit to cover the rear 180, would it work ? allowing the PTZ to spin 180 to look at any triggers received from the secondary 180 bullet. i presume is that called smart linage or something
 
You can link other camera smart events to PTZ, for instance camera X detected line crossing -> push command to PTZ to trigger Preset 18 that is set to the area of Camera X.
That linkage is only possible via NVR or Hik-Central vms, cant really do with only 2 cameras you need a handler. Tandemvu is all in one
 
trempa92 said:
You can link other camera smart events to PTZ, for instance camera X detected line crossing -> push command to PTZ to trigger Preset 18 that is set to the area of Camera X.
That linkage is only possible via NVR or Hik-Central vms, cant really do with only 2 cameras you need a handler. Tandemvu is all in one
Click to expand...
Thanks Trempa, so are you saying i must run the Hikvision NVR with software. i wont get this if the Cameras are running into the NAS provided software such as QNAPS or SYNOLOGY ?
 
You must log in or register to reply here.
Top Bottom