Hikvision Zero Channel over port 8000 or onvif

[intelvtd]

hi. i have hikvision ds-7208hqhi-k1/p as my main dvr and ds-7204huhi-k1/p as my second dvr. i have ethernet connection between two dvrs. my 4 channel dvr support 4 additional ip cameras and i added other dvr as ip camera and select up to 4 channels of it`s cameras. can i add zero channel of my 8 channel dvr as ip camera? i can view zero channel with rtsp or ivms. but in ds-7204huhi-k1/p i can add another dvr with hikvision protocol (port 8000) or onvif (port 80). there is no rtsp support for adding ip camera or custom protocol like nvr. if there is such support what number i should fill in channel number?
thanks.

 

[alastairstevenson]

can i add zero channel of my 8 channel dvr as ip camera?

Try it and see, then we'll all know.

 

[intelvtd]

Try it and see, then we'll all know.

I tested with both port 8000 and port 80. it does not works. only rtsp works. maybe some special number must be put on channel number for zero-channel.

 

[TonyR]

From @JoergDr in Nov. 2016 ==>> URL TO access multiple camears via mjpeg with Hikvision NVR

"The HikVision NVR only works with H.264 (rtsp) streams, in input and output, it does not support MJPEG.​

To see the channel zero stream (a composing of all input streams), use this URL:​

​

rtsp:/<user>:<password>@<nvr-ip>:554/Streaming/Channels/001​

​

You can compose the channel zero as "live view" when you are connected to the NVR via VGA or HDMI.​

It is not possible to configure "live view" using the browser interface."​

 

[TonyR]

FWIW, more on the subject, resolved near end of thread with RTSP, not MJPEG ==>> How to view channel zero using RTSP