I purchased a dahua 16 channel NVR, but it seems when I place a 9th camera on the system, it doesn't work. Under system info it tells me it is a 16 channel record, I can also display up to 16 camera, but think that doesn't mean anything I only have 9 camera, and waiting for delivery of my tenth, how can I be sure it is a 16 channel NVR
How do you verify how many channels your nvr will record
- Thread starter tokyojoe
- Start date
If you have 16 boxes it should be 16 channels...the 8 channels one have 8 boxes + 1 empty box only (when viewing 3x3 display).
You also have to see what specs your NVR is rated for then divide that by the number of cameras you have, especially the bitrate spec...
For example if your 16 channel machine is rated for 80 Mbps and you have 10 cameras, you should set each one no higher than 9-10 Mbps/camera or else your 11th one won't work (no resource error is typical).
You also have to see what specs your NVR is rated for then divide that by the number of cameras you have, especially the bitrate spec...
For example if your 16 channel machine is rated for 80 Mbps and you have 10 cameras, you should set each one no higher than 9-10 Mbps/camera or else your 11th one won't work (no resource error is typical).
code2
Getting the hang of it
so technically a 240 nvr with 8 cameras would give 30FPS each camera which would be real time?