=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.06.05 18:51:08 =~=~=~=~=~=~=~=~=~=~=~=
NDXSAT0table1
UNZOK!load all-in-one fw
0
NC323_DRAM1_1066_4096Gb_DRAM2_4096Gb 06/21/2021 11:44:04
HIK boot from flash
SPI NAND MID=000000C8 DEV=00000051
check sum ok!
RSA ok!
smp_start
2acor1await
U-Boot 2016.07-svn81528 (Nov 02 2022 - 14:22:17 +0800), Build: jenkins-Backend-BSP-CCI-8116
Read power trim = 0x0000000d
cpu 1200 remap_data 54
Set CPU clk 1200MHz
Read power trim = 0x0000000d
ddr 2128 remap_data 30
[Dynamic change partition Warning]Use default partition info,ret is -19!
Hit ctrl+u to stop autoboot: 1 0
Loading file 'uImage' to addr 0x02000000...
Done
Verifying Bootlogo RSA ... OK
## Starting application at 0x1A000000 ...
start JPEG decode...
Display the Hik-bootlogo
## Application terminated, rc = 0x0
run command 'go' failed
Verifying RSA ... OK
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux-4.9.118
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5667093 Bytes = 5.4 MiB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
Starting kernel ...
ACTLR: 0x00000005
ACTLR: 0x00000045
Disable MMU
Clear MMU
Uboot L2 cache aux val: 0x72230000
Uboot L2 cache prefetch ctrl val: 0x70800000
Uboot L2 cache ctrl val: 0x00000000
Done
Uncompressing Linux... done, booting the kernel.
abce[0-0.943081] init(1) called reboot syscall, cmd: 0x0.
Thu Jan 1 00:00:00 UTC 1970
Starting udev: [ OK ]
[4;34m Rramoops file has not been generated! [0m
the file of tftp has been deleted!
UBI device number 0, total 832 LEBs (105644032 bytes, 100.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
waiting for /dev/ubi0_0.
UBI device number 1, total 128 LEBs (16252928 bytes, 15.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
waiting for /dev/ubi1_0.
the system is damaged ?
bootpart :0
sh: d: unknown operand
BOOTLOGO SUP_BOOTLOGO=1
language is 1
---------------------------------------------------------------------------------------------
******load hkmem start*******
---------------------------------------------------------------------------------------------
memload devType is af5a
Protect Shell (psh)
Enter 'help' for a list of DVR/NVR system commands.
# 0x0c000000 0x34000000, 0x 0x
DS_72_78_08HQH_M_A8
cava_bin 0x0c000000 0x400000 dsp_ddr0 0xc400000 0x28000000
---------------------------------------------------------------------------------------------
******load hkmem end*******
---------------------------------------------------------------------------------------------
/home/hkmem_load.sh: line 320: ¯Ín+v: not found
/home/hkmem_load.sh: line 320: BæñUE-úõEH: not found
/home/hkmem_load.sh: line 321: syntax error: unexpected "("
----------hkmem_load success ----------
----------<1> tar sys_app ----------
ded in[/dav0/webs.tar.lzma]/out[/home/app/webs.tar.lzma] ioctl faild. errno[-1]
tar: bad lzma header
tar: short read
decompress webs error !!!
cp: can't stat '/home/app/lib/*.so*': No such file or directory
mv: can't rename '/home/app/hisi/modules': No such file or directory
mv: can't rename '/home/app/hisi/*': No such file or directory
sh: can't open '/mnt/mtd/vg_boot.sh'
cp: can't stat '/lib/modules/4.9.118/hdal/ddr_monitor': No such file or directory
[1-7.272260] DWC_ETH_QOS fcc00000.eth0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
tar: unexpected EOF
tar: short read
decompress sys_app error !!!
----------<2> tar gui ----------
mv: can't rename '/home/app/res/*': No such file or directory
----------<4> show logo ----------
ded in[/dav0/gui_res.tar.lzma]/out[/home/app/gui_res.tar.lzma] ioctl faild. errno[-1]
tar: can't open '/home/app/logo.tar.gz': No such file or directory
tar: bad lzma header
tar: short read
tar: can't open '/home/app/exec/dvrCmd.tar.gz': No such file or directory
decompress gui_res error !!!
mv: can't rename '/home/app/exec/pppd': No such file or directory
mv: can't rename '/home/app/exec/pppoe': No such file or directory
mv: can't rename '/home/app/exec/mytar': No such file or directory
mv: can't rename '/home/app/exec/ptzCfg.bin': No such file or directory
chmod: /usr/bin/dvrCmd/dvrtools: No such file or directory
----------<5> del no use res ----------
WebComponents.exe does not exist
start netOpenProc !!!!!
chmod: /home/app/exec/netOpenProc: No such file or directory
start savelog proc!!!!!
/home/start.sh: line 231: /home/app/exec/netOpenProc: not found
chmod: /home/app/exec/saveLog: No such file or directory
/home/start.sh: line 231: /home/app/exec/saveLog: not found
sh: can't open '/home/app/exec/wifi-ko/install_sta.sh'
mv: can't rename '/home/app/exec/wifi-ko': No such file or directory
mv: can't rename '/home/app/exec/dropbear*': No such file or directory
/home/start.sh: line 277: dropbearkey: not found
--------------- start APP --------------
/home/start.sh: cd: line 318: can't cd to /home/app/exec/
--------------- start hik_dsp --------------
/home/start.sh: line 318: /home/app/exec/master: not found
/home/start.sh: line 318: ./hik_dsp: not found
chmod: /home/app/exec/GPLProc: No such file or directory
/
/home/start.sh: line 318: /home/app/exec/GPLProc: not found
/home/start.sh: line 338: syntax error: unexpected ")"
