How to control & monitor garage door with PC

JeepThing

n3wb
Apr 28, 2016
8
0
Tampa, FL
Are any of you using an IoT device to monitor and control your garage door? I'm looking for a good DIY solution.
 
I just installed two new Chamberlain openers with their proprietary My-Q interface. (One had the WiFi and the other linked to it, but I control them independent).
It actually works very well. I also added a My-Q controlled light switch to the outdoor lights and tied it to the opener, so they turn off 4-1/2 minutes after the door closes.
Gotta admit... it's kinda cool to watch the doors from my BI remotely and click the My-Q app. My daughter goes off to school three days a week and closes the door once, at best.

For a simpler retro-fit, you might try these:
http://garagedoorbuddy.com/

Just my $.02.

Jim
 
There are also a bunch of automatic garage door closers, if your garage is short just make sure the reverse force is low enough you won't take off your bumper if you park badly.

For chamberlain/craftsman openers this is my favorite option:
http://www.amazon.com/LiftMaster-888LM-Security-Upgrades-Previous/dp/B00B8BFG0O/ref=pd_sim_sbs_421_1?ie=UTF8&dpID=41C0paHXWrL&dpSrc=sims&preST=_AC_UL160_SR160,160_&refRID=0P490Z1HG9YJQPW8S2DS
Works on openers from 1998-2011, not sure about newer ones. Also enables the use of newer more secure remotes.


EDIT: *Upon capacitor failure, may spontaneously open your garage * Extended warranty through 9/2023
 
Last edited:
As an Amazon Associate IPCamTalk earns from qualifying purchases.