How to hard reset DH-IPC-HFW4120EP??
- Thread starter Sakalam
- Start date
fstfrd50
Getting the hang of it
It says that I need to make shorrt circuit, how can I do that? I really don't have an idea because I am new to this. Thank you
fstfrd50
Getting the hang of it
A short circuit is where you apply a temporary thin wire to make contact at the IP camera circuit board to reset the camera. Attached is a detailed info on how exactly to reset your camera.
Sent from my iPhone using Tapatalk
Dahua IPC-HFW4431R-Z Factory Reset - Network Camera Tech
Here is what you need to do in order to reset your Dahua IPC-HFW4431R-Z camera back to factory default settings. This is the only way to recover from a forgotten administrator password, and while this
networkcameratech.com
Sent from my iPhone using Tapatalk
Thank you broA short circuit is where you apply a temporary thin wire to make contact at the IP camera circuit board to reset the camera. Attached is a detailed info on how exactly to reset your camera.
Dahua IPC-HFW4431R-Z Factory Reset - Network Camera Tech
Here is what you need to do in order to reset your Dahua IPC-HFW4431R-Z camera back to factory default settings. This is the only way to recover from a forgotten administrator password, and while thisnetworkcameratech.com
Sent from my iPhone using Tapatalk
fstfrd50
Getting the hang of it
Where you able to reset your camera and get it back in service?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
fstfrd50
Getting the hang of it
Try setting your camera IP address ( network ) from DHCP to STATIC for starters, by doing so you'll have a permanent address. If the camera keeps disconnecting make sure you have poe switch that can support your camera or 12v power adapter. Try a different port or ethernet cable like you mentioned.
Attachments
Last edited:
All the ports on the switch is fine so maybe the camera cable itself has a problem and I stop checking because they buy a new one. but thanks a lot for answering me!