How to use Audio connector on an HIKVision camera

[Mika Brel]

Hello guys,

How I can add microphone on my HIKVISION DS-2CD2132F-IS ?

With this kind of microphone, it could be works ?


If yes, how can I plug it ?
If no, what is the solution to plug a microphone ?

 

[CamFan]

https://www.ipcamtalk.com/showthread.php/697-How-to-use-Hikvision-Audio-and-Alarm-IO-connections
That is an audio OUTPUT. Connect it to a speaker amp.

 

[alastairstevenson]

That is an audio OUTPUT. Connect it to a speaker amp.

It's both - In and Out, microphone and speaker.

 

[Mika Brel]

Thanks for your reply,

Great if we can do both, Someone can explain me how to plug the microphone ?

 

[alastairstevenson]

Someone can explain me how to plug the microphone ?[/QUOTE]
In truth - it would be pure guesswork, with no indication of what type it is.
Where did you get it / what is the specification etc?
But guessing - it's probably a powered mic, as it has 3 wires, red/black for power at an unknown voltage.

 

[Mika Brel]

Buy on aliexpress :

 

[alastairstevenson]

OK, so it is a powered microphone, and the picture shows the power requirements and connections and the audio connections to the camera.
What it does not specify are the output signal levels - but you can easily test it with no great risk.
You have all the information you need.

 

[CamFan]

Alastair, you are right! It does have INPUT.

Mika, see this PDF for more info:http://overseas.hikvision.com/ueditor/net/upload/2015-06-10/adb2bcea-e809-4728-a937-917b98c57a21.pdf

 

[Mika Brel]

Many thanks for the PDF CamFan !!

Then I need power
My camera works with POE, do you know if there is solution to use poe for the microphone ?

If Not, do you know great passive microphone ?