How to view all channels on Dahua NVR4108-P-4KS2

[Jpeeters]

I have recently bought a Dahua NVR4108-P-4KS2 and 3 dahua ipcams. Normally i use the android app "ip cam viewer" to view the individual 3 ip cams. Now my cams are directly connected to the nvr. When i add my ip number of the nvr in "ip cam viewer", it always showing only channel 1. How can i view the other 2 cams? I added other channels in ip cam viewer but that's not working. Is there maybe an other app which i can use and works flawless?

 

[BillG]

Don't know about ipcam viewer, but in Tiny cam you point all cams to the nvr ip and change channel numbers for each cam. Cam 1=channel1, cam 2=channel2 etc.

 

[Jpeeters]

Ok i will try that, thanks

 

[BillG]

My nvr's are non poe. Probably different setup for yours.

 

[tangent]

rtsp://<username>:<password>@<ip>:<port>/cam/realmonitor?channel=<ChannelNo>&subtype=<typeNo>

change the channel

 

[Jpeeters]

Have tried that in Ip Cam Viewer (RTSP stream), but failed with every channel. Only channel 1 was showing up.
So i will try Tiny Cam this weekend.
thanks