Hi all.
Have you tested this model PTZ bullet camera for 90-100 meters supply with POE function ?
In my case i have a TP-LINK switch TL-SG3424P managed POE 802.3af/at and a point of 95 meters of ethernet cable with this model camera. The switch in the manual datasheet support max 100m. The POE' s LED on switch it does not turn on but in the monitor, the device power it seem good/ok. The comunication data does not work.
Which problem could be it ?
In the screen you can see that the power absorption (the screen1 show the camera during the day and the screnn2 during night with ir turn on) the HUISUN is on port 3, the others are hikvision cameras...
P.S: if i put hikvision camera with same distance in the same point, it works whitout problem.
Have you tested this model PTZ bullet camera for 90-100 meters supply with POE function ?
In my case i have a TP-LINK switch TL-SG3424P managed POE 802.3af/at and a point of 95 meters of ethernet cable with this model camera. The switch in the manual datasheet support max 100m. The POE' s LED on switch it does not turn on but in the monitor, the device power it seem good/ok. The comunication data does not work.
Which problem could be it ?
In the screen you can see that the power absorption (the screen1 show the camera during the day and the screnn2 during night with ir turn on) the HUISUN is on port 3, the others are hikvision cameras...
P.S: if i put hikvision camera with same distance in the same point, it works whitout problem.