Jeroen68
n3wb
Hi Guys, before I go download and spend time upgrading my NVR to the next version firmware,
is there any usable improvement I will benefit from, upgrading from V4.22.005 build 191208 NVR Firmware to V4.40.016_200803 from hikvision on a DS-7608NI-K2 / 8P ?
Last time I did a firmware upgrade I exported the device parameters, the IP cam parameters and the IOT parameters, but when the new firmware finally booted up (this takes a while!) - it did not read in the config files off USB properly and I spent a blimming 2 hours configuring the NVR from scratch. - not much fun.
Regards!
is there any usable improvement I will benefit from, upgrading from V4.22.005 build 191208 NVR Firmware to V4.40.016_200803 from hikvision on a DS-7608NI-K2 / 8P ?
Last time I did a firmware upgrade I exported the device parameters, the IP cam parameters and the IOT parameters, but when the new firmware finally booted up (this takes a while!) - it did not read in the config files off USB properly and I spent a blimming 2 hours configuring the NVR from scratch. - not much fun.
Regards!