Inconsistent Camera Features Showing in NVR - SOLVED

[esanto1]

Hi,

I just recently had 7x DS-2CD2H85FWD-IZS cams installed with a 7608 NVR. They are connected directly to the back of it. I enabled the Virtual Host feature in the NVR and logged in to each camera and can confirm they all run the same firmware version. In the Smart Event section on the NVR, for 6 of the camera's I only see Scene Change Detection, Intrusion Detection & Line Crossing Detection. On the 7th camera though, I also see Face Detection, Unattended Baggage Detection & Object Removal Detection.

Can someone explain why I only see these extra 3 options on one camera when they're all the same model and all run the same firmware?

Thanks

 

[esanto1]

Hi All,

Looks like I've figured this one out. In the Video/Audio section of the camera config, the extra 3 options disappear if you enable H.265+. Tested switching it off and they came back. Now I need to research these features and whether I even need them.