Installing CTRONICS IP Camera. None of the old standbys work

[Michale32086]

Just got in a nice CTRONICS IP camera.. Great picture..

BI doesn't seem to like it though.. I have installed a couple CT cameras. One used the GENERIC install settings, another used the ESCAM... Still another used FOSCAM settings.. Weird..

But this one won't work on any of those..

Hoping someone can help me out with this...

 

[Michale32086]

Opening port 80...
HTTP Get / request...
Redirected to 10.1.1.201:80
OK
ONVIF GetSystemDateAndTime
HTTP 404
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

That's what I get when I let BI attempt AUTO DETECT

And then it selects the GENERIC setting.. But I still don't get a pic.. But I know the Camera is up and running..

 

[Michale32086]

Further info....

ONVIF Manager is giving me this:

 

[squaretie]

Tiny bit late on replying but figured it out
Optional: Change the Onvif port to 8899 at the camera to be consistent with other cameras. Settings/ONVIF -- this will require a manual reboot to take effect.
Video: This is the critical step. Change the Video Coding from the default H264 Mainline to H264 baseline. No idea what the difference is, but it was night and day when connecting. Hooray!
Blue Iris: Network IP camera. MAKE: Generic/ONVID MODEL:RTSP H.264/H.265/MJPG/MPEG4
PATH:/11
RTSP port 554
ONVIF port: 8899 (defaults to 8080 on the camera, so match these up).
Address is http connection to IP address and username/pasword