Hi,
I’m using two 4k. as 3. Party cams on my boat with Raymarine Axiom chart plotter, setup according to Raymarine protocol. This has been function well for a 5 years. Lately one cam started going black and I thought this was ”end of life“ and replaced with a spare.
But, worked for a week and then went black again, hmmm.. both cams (the other one is still good) is connected through a switch, and when disconnecting the Ethernet cable from cam, and plugging back into switch picture is coming back. Then working fine for some days, for then going black again
Chart plotter has been turned one of approx 5-10 times in this period. DHCP ion chart plotter is set to Automatic.
I’m not using POE, 12v directly to cams.
Anyone who has any clue on what could be the issue here?
I’m using two 4k. as 3. Party cams on my boat with Raymarine Axiom chart plotter, setup according to Raymarine protocol. This has been function well for a 5 years. Lately one cam started going black and I thought this was ”end of life“ and replaced with a spare.
But, worked for a week and then went black again, hmmm.. both cams (the other one is still good) is connected through a switch, and when disconnecting the Ethernet cable from cam, and plugging back into switch picture is coming back. Then working fine for some days, for then going black again
Chart plotter has been turned one of approx 5-10 times in this period. DHCP ion chart plotter is set to Automatic.
I’m not using POE, 12v directly to cams.
Anyone who has any clue on what could be the issue here?
Last edited: