IP Cam Talk Custom Community DeepStack Model

[pbc]

Okay, this correct? Not sure why it says "actionnetv2ipcam-"?

 

[MikeLud1]

Okay, this correct? Not sure why it says "actionnetv2ipcam-"?

View attachment 181435

Looks all correct. Below are all the custom models that are installed with Object Detection (YOLOv5 6.2)

 

[pbc]

Looks all correct. Below are all the custom models that are installed with Object Detection (YOLOv5 6.2)
View attachment 181436

Yeah just thought I'd see a comma after "acrionnettv".

Just confirming for the license plate camera it looks like I don't need to add "ipcam-" in front of the license-plate for the custom model name?

 

[MikeLud1]

Yeah just thought I'd see a comma after "acrionnettv".

Just confirming for the license plate camera it looks like I don't need to add "ipcam-" in front of the license-plate for the custom model name?

Once you install the License Plate Reader module use the below settings. Also all cameras will be running the license plate detections so cameras you do not what to run the license plate detection needs to have alpr:0 in the Custom Models box.

 

[pbc]

Once you install the License Plate Reader module use the below settings. Also all cameras will be running the license plate detections so cameras you do not what to run the license plate detection needs to have alpr:0 in the Custom Models box.

View attachment 181437

Just to confirm, here are my non LPR cameras:



And the LPR Camera:




And the master AI settings:



Look correct?

 

[MikeLud1]

Just to confirm, here are my non LPR cameras:

View attachment 181447

And the LPR Camera:

View attachment 181448


And the master AI settings:

View attachment 181449

Look correct?

Remove space, uncheck Use main stream if available, and change To confirm to person,vehicle


Add DoNotCancel

 

[pbc]

Just to confirm, same changes to the LPR camera? I.e., do I check or uncheck "Use main stream if available" and do I insert "DoNotCancel"?

 

[pbc]

Hmmmm...still not getting any alerts. Have a guy doing some work right now on my driveway, but nothing is triggering...

 

[MikeLud1]

Hmmmm...still not getting any alerts. Have a guy doing some work right now on my driveway, but nothing is triggering...

View attachment 181454View attachment 181455View attachment 181456


View attachment 181458View attachment 181459View attachment 181460

Uncheck Override server

 

[MikeLud1]

Just to confirm, same changes to the LPR camera? I.e., do I check or uncheck "Use main stream if available" and do I insert "DoNotCancel"?

Leave the LPR camera Use main stream if available checked. For DoNotCancel it is best to have it in all your cameras so the AI will analyze all the +real-time images

 

[Nunofya]

Leave the LPR camera Use main stream if available checked. For DoNotCancel it is best to have it in all your cameras so the AI will analyze all the +real-time images

Can you only have DoNotCancel in the To cancel box? I also have "bus" from when it was recommended a long time ago.

 

[MikeLud1]

Can you only have DoNotCancel in the To cancel box? I also have "bus" from when it was recommended a long time ago.

All you need is DoNotCancel, it can be anything as long as it is not in the model you are using.

 

[pbc]

Hmmm...next issue:

1. None of my cameras are trigging alerts to the BI app on my phone.

2. My front door camera doesn't trigger anything, just had my son walk in front of it (And had the profile set to "at work"). It also, weirdly, is the only camera without its own Alerts directory.

Settings below:

 

[MikeLud1]

Hmmm...next issue:

1. None of my cameras are trigging alerts to the BI app on my phone.

2. My front door camera doesn't trigger anything, just had my son walk in front of it (And had the profile set to "at work"). It also, weirdly, is the only camera without its own Alerts directory.

Settings below:

View attachment 181518View attachment 181519
View attachment 181520View attachment 181521
View attachment 181522View attachment 181523View attachment 181524

Is there a canceled alert at the time it should alerted you. If so open the saved AI analysis details to see what happened.

 

[MikeLud1]

Hmmm...next issue:

1. None of my cameras are trigging alerts to the BI app on my phone.

2. My front door camera doesn't trigger anything, just had my son walk in front of it (And had the profile set to "at work"). It also, weirdly, is the only camera without its own Alerts directory.

Settings below:

View attachment 181518View attachment 181519
View attachment 181520View attachment 181521
View attachment 181522View attachment 181523View attachment 181524

Also run a test using CodeProject.AI Server Explorer to make sure CodeProject.AI is working.

 

[pbc]

Is there a canceled alert at the time it should alerted you. If so open the saved AI analysis details to see what happened.

No alerts showed up at all.

 

[pbc]

Also run a test using CodeProject.AI Server Explorer to make sure CodeProject.AI is working.

View attachment 181528

View attachment 181529

Seems to be working:

 

[MikeLud1]

Seems to be working:

View attachment 181530

Then it must be an issue with your motion settings, try unchecking Object detection also try lowering the Min. Contrast.

 

[pbc]

Thanks, I must have copied the "pass section B" or whatever that is called over to the FrontDoor camera which was causing it. Fixed.

Only remaining issue is I'm not getting notifications to my BI app. But will look into this. BTW, do I need this blurb in this field?

 

[MikeLud1]

Thanks, I must have copied the "pass section B" or whatever that is called over to the FrontDoor camera which was causing it. Fixed.

Only remaining issue is I'm not getting notifications to my BI app. But will look into this. BTW, do I need this blurb in this field?

View attachment 181532

If you want Blue Iris to mark the alert as a vehicle then leave it