I am having a problem viewing my Dahua cameras connected to a Dahua NVR using IP Cam Viewer Pro with Roku. Only two cameras will show up using 192.168.0.108 which is the IP address of the NVR. The cameras IP addresses are in the 10.1.1.65 to 10.1.1.74 range, I think this is where the problem is. Do I need to change the cameras to 192.168.0.XXX range?
IP Cam Viewer Pro
- Thread starter Chris J LaBoda
- Start date
bigredfish
Known around here
On the app's configuration page, put in the channel number of the camera to the right of the media port.
In other words, if you have 6 cams then you'll have 6 different config pages, all with the same IP of the NVR and all other info the same but channel # will be different for each of the 6; the ch# will be 1 through 6.
Online help here, (may be different for Android).
In other words, if you have 6 cams then you'll have 6 different config pages, all with the same IP of the NVR and all other info the same but channel # will be different for each of the 6; the ch# will be 1 through 6.
Online help here, (may be different for Android).
