ip camera ip address

hoboken72c

n3wb
Jul 2, 2024
7
1
Usa
hello i was trying to solve issue im having with my loryta camera model number ipc-b54ir-z12e license plate camera i have it through poe ethernet connected to router i recently switched to new network my ip camera has ip adress of 192.168.1.108 and gateway of 192.168.1.1 my new network is 192.168.40.81 gateway is 192.168.40.1 what should i set my ip camera address so my network will recognize it and make it work thank you.
 
hello i was trying to solve issue im having with my loryta camera model number ipc-b54ir-z12e license plate camera i have it through poe ethernet connected to router i recently switched to new network my ip camera has ip adress of 192.168.1.108 and gateway of 192.168.1.1 my new network is 192.168.40.81 gateway is 192.168.40.1 what should i set my ip camera address so my network will recognize it and make it work thank you.
Set the camera to 192.168.40.XXX; XXX = a unique static IP that is outside of your router's DHCP pool.
 
would gateway for camera be set to 192.168.40.1 or something else sorry little new at this
Yes, gateway for camera would be the same as gateway in router (192.168.40.1) unless you wanted to block camera from Internet.
 
Thank you I will try find xxx number for ip address for camera that will work outside routers dhcp pool I've tried several I tried 192.168.40.193 and 108 but they wouldn't work
 
Are you first changing your PC to a static IP like 192.168.1.100, subnet mask of 255.255.255.0 then trying to log into the camera at 192.168.1.108 so you can then change its IP to the new IP in the subnet 192.168.40.XXX ?
 
Are you first changing your PC to a static IP like 192.168.1.100, subnet mask of 255.255.255.0 then trying to log into the camera at 192.168.1.108 so you can then change its IP to the new IP in the subnet 192.168.40.XXX ?
I can get in my cameras settings on new network but when i go into camera settings to change ip it hasn't worked yet that's as far as I get I just need get last three numbers right so my network will recognize camera it be 192.168.40.xxx the xxx has been problem
 
Set like this

1--------192.168.40.108
2-------255.255.255.0
3-------192.168.40.1

1720014438363.png
 
would gateway for camera be set to 192.168.40.1 or something else sorry little new at this

How do you connect to see the camera footage? NVR? Blue Iris PC? Other? Does the camera need to connect to the internet?
 
What browser are you using when using the camera's webGUI to configure its IP?
Use Internet Explorer or Pale Moon 32 bit

How to enable native Internet Explorer in Windows 10 and 11:
  • Open Notepad:
  • Copy then paste the single line of code below into Notepad:
  • CreateObject("InternetExplorer.Application").Visible=true
  • Save as OpenIE.vbs
  • Make sure the the file name ends in .vbs not .txt, If it ends in .txt you must rename to .vbs
  • Create a shortcut to the above file and double-click it anytime you want native Internet Explorer.