Hello to all, I hope this is the correct venue for my question, I am trying to set up a PTZ board/rotor that uses RS-485 for network use, I am using a DIGI port server that is configured for RS-485, the DIGI uses a TCP port of 2101 to connect to the serial port, SO I can set the BI for an IP address like xxx.xxx.xx.x:2101 and it will connect to the "socket" and I see data go out the port (using browser diag. in the DIGI device) but unlike a RS-232 port the 485 device itself also needs an address, the PTZ board can be set for an address of 0-63, But I have no idea where to go to specify the device address....
Thanks
Thanks