IPC-HDW5442TM-ASE does refresh ip address

[Scale]

Hello everybody,
I changed the NVR newtork setttings to bridge mode.
So all my cameras come from 10.1.1.255 network to 192.168.1.255 network after rebooting.
They work fine and I can see all my cameras from my home network.
But the one camera IPC-HDW5442TM-ASE still has 10.1.1.68 address and it doesn't access from NVR.
NVR can see this camera with old address but it can't work with it.
I tried to change the address from NVR but after search device from camera list it shows again with old ip.
It looks like that this camera doesn't support DHCP and it has fixed ip.
How can I deal with it?

 

[Flintstone61]

There should be a " static" "DHCP" choice on that camera in the actual Camera User interface ( GUI)
on the " network" tab. this is my 5442 Bullet cam interface on Chrome browser.

 

[Scale]

I try to change TCP/IP settings to DHCP and I get the error:

 

[paul@austins.tv]

Locate a valid spare IP address of the virtual NVR assignment as well as gateway etc. Use this as a static IP of camera. Should work hopefully.