Hey Guys,
So I ordered 4 x IPC-HFW4300S from Aliexpress that were supposed to be 3.6mm. They assured me they shipped me 3.6mm and I compared them to some older cameras I have that are 3.6mm and they looked closer to 6mm.
So I pulled one apart and swapped the lenses. Took some screenshots and the seller has now agreed they don't look to be 6mm.
I've now noticed the firmware in the GUI is showing
Device TypeIPC-HFW1320S
Software Version2.400.0000.15.R, build : 2015-08-30
WEB Version3.2.1.291804
ONVIF Version2.4.2
PTZ Version
Camera Version
S/N1LIN9BCPAU00443
This is a different model to that ordered and the serial doesn't look to match that on the box.
Is that to be expected or have they tried to shaft me? I dont know much about this model number IPC-HFW1320S
Can someone help me out with some info?
So I ordered 4 x IPC-HFW4300S from Aliexpress that were supposed to be 3.6mm. They assured me they shipped me 3.6mm and I compared them to some older cameras I have that are 3.6mm and they looked closer to 6mm.
So I pulled one apart and swapped the lenses. Took some screenshots and the seller has now agreed they don't look to be 6mm.
I've now noticed the firmware in the GUI is showing
- Version
Device TypeIPC-HFW1320S
Software Version2.400.0000.15.R, build : 2015-08-30
WEB Version3.2.1.291804
ONVIF Version2.4.2
PTZ Version
Camera Version
S/N1LIN9BCPAU00443
This is a different model to that ordered and the serial doesn't look to match that on the box.
Is that to be expected or have they tried to shaft me? I dont know much about this model number IPC-HFW1320S
Can someone help me out with some info?