IPC-HFW4433F-ZSA - lost connection

fork

fork

n3wb
May 30, 2018
2
0
Rostov-on-Don
1 x IPC-HFW4433F-ZSA camera
1 x TP-LINK TL-SF1005D unmanaged switch with connection to ZyXEL router and 2 outgoing connections - PC and Dahua Cam.

Camera has default IP - 192.168.1.108
Network 192.168.1.X, gateway (ZyXEL) 192.168.1.1

Problem: camera works only 5-10 minutes, then signal is lost. First/second reboot doesn't help, only 3-4 times after compete power off/on.
From the PC side following picture:
ping 192.168.1.108 -t
gets OK for some time, then lost connection/missed packets.

Tonight I've switched off PC and leave IPCAM alone with the switch. Now it works a little better - hangs only 5 times from 00 to 07AM morning. And what is most importantly - self-restored connection in 30-40 minutes.

Now I've switch on PC and camera hangs within the next 2 minutes.

Who faced the similar problem?
 
fork said:
Who faced the similar problem?
Click to expand...
Maybe people with cable problems.
These are the most common causes of network issues.
Try the camera (and maybe the PC) on a different cable to see if it makes a difference.
A cable fault on one device can also have an impact on other devices on the LAN, depending on how the switch/router handles the fault.
 
Should the camera continue to operate autonomously (for example, write a stream to the sd card) when LAN connection is lost (cable problems) ?
 
You must log in or register to reply here.
Top Bottom