IPC-HFW5241E-Z12E AUDIO IN/OUT and ALARM IN/OUT

[novelwolf]

I am looking to get the IPC-HFW5241E-Z12E to work with my hikvision 7608ni-k2/8p NVR. (I need to see a gate 90ft away)

The NVR will be 60 ft away from the installed camera.

I already planned to use a POE switch and run the cat 6 cable to the camera. I want to setup the AUDIO IN and OUT, plus the ALARM IN and OUT.

1) Am i supposed to run the ALARM IN/OUT back to the NVR , via a 2 wire cable, or is it meant to be interfaced with an external device like an alarm system? Can i run this in the same conduit as the Cat 6?

2) Do i need this micophone\speaker to work with the camera?

US $19.9 |Microphone Speaker In 1 Device for Security Camera Outdoor Waterproof for IP Camera Audio Recording Two Way Radio Interphone|CCTV Microphone| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

s.click.aliexpress.com

Thanks
wolf

 

[KCO]

Can I connect directly to the nvr? I have NVR4104 and the sheet says "Two-way Talk 1 Channel Input, 1 Channel Output, RCA"

 

[Arjun]

not loud enough, you'll want something like this

https://www.amazon.com/5-25-Inch-Dual-Marine-Speakers/dp/B000MCEKVG/ref=as_at/?creativeASIN=B000MCEKVG&linkCode=w61&imprToken=0FHg2kKfC2x.v0tBcWvowQ&slotNum=0&tag=ipctk-20&ie=UTF8&qid=1530935482&sr=8-5&keywords=marine+speaker&th=1