Is there a bug in Dahau GUI?

G

GeoffColl

Pulling my weight
Nov 4, 2020
103
100
Scotland
When I make any attempt to change the schedule/period setting on the Dahua GUI, webpage, under IVS - It never appears to show a change in the GUI.

Untitled.jpg

If I set up 24/7. Save. Save again on the "Rule Config" page and then return to Period "Setting" it always shows 'just' Sunday, and not "All" as previously saved.

It seems odd to not have the latest setting showing.

Geoff
 
usually i will do a manual reboot of the camera first before changing the config so that it will stick.

also some ppl say use internet explorer.. instead of other browser..

else try download dahua smart pss and configure from there
 
The rules default to all days and 24x7. I know it only shows Sun as checked but you can see from the green bars that its activated all days 24 hours a day. If you modify it from 24x7, you will see the rules change.
 
  • Like
Reactions: Crows and GeoffColl
biggen said:
The rules default to all days and 24x7. I know it only shows Sun as checked but you can see from the green bars that its activated all days 24 hours a day. If you modify it from 24x7, you will see the rules change.
Click to expand...

Ah - thank you - I expected something obvious, and there it was! Still would have expected the checkboxes to reflect the settings.
But thank you, another thing learned on this long voyage of camera settings....

Now have to work out why the camera only zooms, but doesn't pan/track on IVS.
 
You must log in or register to reply here.
Top Bottom