Is this Dahua PTZ plug and play?

[tubac]

Does anyone know if this cam is plug and play, or should I assign an IP address before connecting to my NVR?

Loryta SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Network Camera Auto Tracking Support PoE+ English Version

https://www.amazon.com/dp/B081RJJQT4/ref=cm_sw_r_cp_api_glc_fabc_zE17FbZA6T9NS

This cam needs a Poe + injector. My OEM Dahua NVR only provides 3af, If I am not mistaken . Will it work toI plug in a stand alone 3at, injector into one of the built in Poe ports on my NVR below?

Security Cameras | IP Cameras | CCTV Video Surveillance Systems

Shop a wide range of high-quality security cameras and access control systems. Get free shipping on orders over $100.

www.securitycameraking.com

Thanks,
Tubac

 

[ljw2k]

Certainly not Plug&Play it needs a lot of setting up and fine tuning.

 

[tubac]

Certainly not Plug&Play it needs a lot of setting up and fine tuning.

Thanks, but as it turns out, it is plug and play if plugged into the built in Poe switch on the NVR. It automatically assigns a url in the 10.1.2xx scheme. All values are default.

Tubac

 

[ljw2k]

Thanks, but as it turns out, it is plug and play if plugged into the built in Poe switch on the NVR. It automatically assigns a url in the 10.1.2xx scheme. All values are default.

Tubac

I think we have Plug & Play mixed up here what I mean is YES the NVR will assign it an IP and add it to the Scheme , but to get it to work proper there are lots of settings and fine tuning which needs to be done via the Web Browser to get it to work as it should.