Hello all!
I've been having some issues with code project. Card is a Quadro P2000 and ran Yolo 5.6.2 successfully at one point.
I had it working initially and couldn't figure out why Licenseplate reader module wasn't seeing cudnn even though it was installed. I tried uninstalling and reinstalling and deleting all the files from program files. Reinstalled a few times.
Out of frustration I then decided to try blue onyx and had issues getting that running. Deleted that and now I'm trying to get CPAI working again. At least from what I read the fact it wasn't using my GPU for the license plate reader was due to me running Cuda 12.8, but now I can't get any modules installed.
This is my log for trying to install and attempting to run:
17:28:53: Preparing to install module 'ObjectDetectionYOLOv5-6.2'
17:28:53: Downloading module 'ObjectDetectionYOLOv5-6.2'
17:28:53:Installing module 'ObjectDetectionYOLOv5-6.2'
17:28:53:ObjectDetectionYOLOv5-6.2: 'chcp' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: Installing CodeProject.AI Analysis Module
17:28:53:ObjectDetectionYOLOv5-6.2: ======================================================================
17:28:53:ObjectDetectionYOLOv5-6.2: CodeProject.AI Installer
17:28:53:ObjectDetectionYOLOv5-6.2: ======================================================================
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: 47.1Gb of -1Gb available on (No label) (Windows 10 x86_64 - windows)
17:28:53:ObjectDetectionYOLOv5-6.2: General CodeProject.AI setup
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: Checking for VC++ Redist...Downloading VC++ Redist files...BITS transfer failed. Trying Powershell....
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: Download failed. Sorry.
17:28:53:ObjectDetectionYOLOv5-6.2: Unable to download VC redist installer
17:28:53:ObjectDetectionYOLOv5-6.2: Creating Directories...done
17:28:53:ObjectDetectionYOLOv5-6.2: GPU support
17:28:53:ObjectDetectionYOLOv5-6.2: CUDA Present...No
17:28:54:ObjectDetectionYOLOv5-6.2: ROCm Present...No
17:28:54:ObjectDetectionYOLOv5-6.2: Checking for .NET 9.0...Checking runtimes...Upgrading: .NET aspnetcore is 0
17:28:54:ObjectDetectionYOLOv5-6.2: Current highest version is 0. Installing newer version.
17:28:54:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: Installing WinGet...Done.
17:28:54:ObjectDetectionYOLOv5-6.2: Could Not Find C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2\Microsoft.VCLibs.x64.14.00.Desktop.appx
17:28:54:ObjectDetectionYOLOv5-6.2: Could Not Find C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2\Microsoft.UI.Xaml.2.8.x64.appx
17:28:54:ObjectDetectionYOLOv5-6.2: Could Not Find C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.msixbundle
17:28:54:ObjectDetectionYOLOv5-6.2: Cleaning up...Done.
17:28:54:ObjectDetectionYOLOv5-6.2: 'winget' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: ** You may need to restart this terminal (or VS Code if you're
17:28:54:ObjectDetectionYOLOv5-6.2: in VS Code) and rerun setup.bat for the rest of this setup
17:28:54:ObjectDetectionYOLOv5-6.2: script to work.
17:28:56:ObjectDetectionYOLOv5-6.2: Reading ObjectDetectionYOLOv5-6.2 settings.......done
17:28:56:ObjectDetectionYOLOv5-6.2: Installing module Object Detection (YOLOv5 6.2) 1.10.0 (Internal)
17:28:56:ObjectDetectionYOLOv5-6.2: Installing Python 3.7
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: Downloading Python 3.7 interpreter...BITS transfer failed. Trying Powershell....
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: Download failed. Sorry.
17:28:56:ObjectDetectionYOLOv5-6.2: 'robocopy' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: '"C:\Program Files\CodeProject\AI\runtimes\bin\windows\python37\python.exe"' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: Creating Virtual Environment (Shared)...done
17:28:56:ObjectDetectionYOLOv5-6.2: The system cannot find the path specified.
17:28:56:ObjectDetectionYOLOv5-6.2: Confirming we have Python 3.7 in our virtual environment...
17:28:56:Module ObjectDetectionYOLOv5-6.2 installed successfully.
17:28:56:
17:28:56:Module 'Object Detection (YOLOv5 6.2)' 1.10.0 (ID: ObjectDetectionYOLOv5-6.2)
17:28:56:Valid: True
17:28:56:Module Path: <root>\modules\ObjectDetectionYOLOv5-6.2
17:28:56:Module Location: Internal
17:28:56:AutoStart: True
17:28:56:Queue: objectdetection_queue
17:28:56:Runtime: python3.7
17:28:56:Runtime Location: Shared
17:28:56:FilePath: detect_adapter.py
17:28:56:Start pause: 1 sec
17:28:56: Parallelism: 0
17:28:56:LogVerbosity:
17:28:56: Platforms: all,!raspberrypi,!jetson
17:28:56:GPU Libraries: installed if available
17:28:56:GPU: use if supported
17:28:56:Accelerator:
17:28:56:Half Precision: enable
17:28:56:Environment Variables
17:28:56:APPDIR = <root>\modules\ObjectDetectionYOLOv5-6.2
17:28:56:CUSTOM_MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\custom-models
17:28:56:MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\assets
17:28:56:MODEL_SIZE = Medium
17:28:56:USE_CUDA = True
17:28:56:YOLOv5_AUTOINSTALL = false
17:28:56:YOLOv5_VERBOSE = false
17:28:56:
17:28:56:Error trying to start Object Detection (YOLOv5 6.2) (detect_adapter.py)
17:28:56:Error is: An error occurred trying to start process 'C:\Program Files\CodeProject\AI\runtimes\bin\windows\python37\venv\Scripts\python' with working directory 'C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2'. The system cannot find the file specified.
17:28:56: at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at CodeProject.AI.Server.Modules.ModuleProcessServices.StartProcess(ModuleConfig module, String installSummary)
17:28:56: Please check the CodeProject.AI installation completed successfully
17:28:56:Module ObjectDetectionYOLOv5-6.2 started successfully.
17:28:56:Installer exited with code 255
17:28:56:Call to run Install on module ObjectDetectionYOLOv5-6.2 has completed.
17:30:04:Update ObjectDetectionYOLOv5-6.2. Setting AutoStart=true
17:30:04:Restarting Object Detection (YOLOv5 6.2) to apply settings change
17:30:04:ObjectDetectionYOLOv5-6.2 has left the building
17:30:04:
17:30:04:Module 'Object Detection (YOLOv5 6.2)' 1.10.0 (ID: ObjectDetectionYOLOv5-6.2)
17:30:04:Valid: True
17:30:04:Module Path: <root>\modules\ObjectDetectionYOLOv5-6.2
17:30:04:Module Location: Internal
17:30:04:AutoStart: True
17:30:04:Queue: objectdetection_queue
17:30:04:Runtime: python3.7
17:30:04:Runtime Location: Shared
17:30:04:FilePath: detect_adapter.py
17:30:04:Start pause: 1 sec
17:30:04: Parallelism: 0
17:30:04:LogVerbosity:
17:30:04: Platforms: all,!raspberrypi,!jetson
17:30:04:GPU Libraries: installed if available
17:30:04:GPU: use if supported
17:30:04:Accelerator:
17:30:04:Half Precision: enable
17:30:04:Environment Variables
17:30:04:APPDIR = <root>\modules\ObjectDetectionYOLOv5-6.2
17:30:04:CUSTOM_MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\custom-models
17:30:04:MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\assets
17:30:04:MODEL_SIZE = Medium
17:30:04:USE_CUDA = True
17:30:04:YOLOv5_AUTOINSTALL = false
17:30:04:YOLOv5_VERBOSE = false
17:30:04:
17:30:04:Error trying to start Object Detection (YOLOv5 6.2) (detect_adapter.py)
17:30:04:Error is: An error occurred trying to start process 'C:\Program Files\CodeProject\AI\runtimes\bin\windows\python37\venv\Scripts\python' with working directory 'C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2'. The system cannot find the file specified.
17:30:04: at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at CodeProject.AI.Server.Modules.ModuleProcessServices.StartProcess(ModuleConfig module, String installSummary)
I've been having some issues with code project. Card is a Quadro P2000 and ran Yolo 5.6.2 successfully at one point.
I had it working initially and couldn't figure out why Licenseplate reader module wasn't seeing cudnn even though it was installed. I tried uninstalling and reinstalling and deleting all the files from program files. Reinstalled a few times.
Out of frustration I then decided to try blue onyx and had issues getting that running. Deleted that and now I'm trying to get CPAI working again. At least from what I read the fact it wasn't using my GPU for the license plate reader was due to me running Cuda 12.8, but now I can't get any modules installed.
This is my log for trying to install and attempting to run:
17:28:53: Preparing to install module 'ObjectDetectionYOLOv5-6.2'
17:28:53: Downloading module 'ObjectDetectionYOLOv5-6.2'
17:28:53:Installing module 'ObjectDetectionYOLOv5-6.2'
17:28:53:ObjectDetectionYOLOv5-6.2: 'chcp' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: Installing CodeProject.AI Analysis Module
17:28:53:ObjectDetectionYOLOv5-6.2: ======================================================================
17:28:53:ObjectDetectionYOLOv5-6.2: CodeProject.AI Installer
17:28:53:ObjectDetectionYOLOv5-6.2: ======================================================================
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: 47.1Gb of -1Gb available on (No label) (Windows 10 x86_64 - windows)
17:28:53:ObjectDetectionYOLOv5-6.2: General CodeProject.AI setup
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: Checking for VC++ Redist...Downloading VC++ Redist files...BITS transfer failed. Trying Powershell....
17:28:53:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:53:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:53:ObjectDetectionYOLOv5-6.2: Download failed. Sorry.
17:28:53:ObjectDetectionYOLOv5-6.2: Unable to download VC redist installer
17:28:53:ObjectDetectionYOLOv5-6.2: Creating Directories...done
17:28:53:ObjectDetectionYOLOv5-6.2: GPU support
17:28:53:ObjectDetectionYOLOv5-6.2: CUDA Present...No
17:28:54:ObjectDetectionYOLOv5-6.2: ROCm Present...No
17:28:54:ObjectDetectionYOLOv5-6.2: Checking for .NET 9.0...Checking runtimes...Upgrading: .NET aspnetcore is 0
17:28:54:ObjectDetectionYOLOv5-6.2: Current highest version is 0. Installing newer version.
17:28:54:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: Installing WinGet...Done.
17:28:54:ObjectDetectionYOLOv5-6.2: Could Not Find C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2\Microsoft.VCLibs.x64.14.00.Desktop.appx
17:28:54:ObjectDetectionYOLOv5-6.2: Could Not Find C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2\Microsoft.UI.Xaml.2.8.x64.appx
17:28:54:ObjectDetectionYOLOv5-6.2: Could Not Find C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.msixbundle
17:28:54:ObjectDetectionYOLOv5-6.2: Cleaning up...Done.
17:28:54:ObjectDetectionYOLOv5-6.2: 'winget' is not recognized as an internal or external command,
17:28:54:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:54:ObjectDetectionYOLOv5-6.2: ** You may need to restart this terminal (or VS Code if you're
17:28:54:ObjectDetectionYOLOv5-6.2: in VS Code) and rerun setup.bat for the rest of this setup
17:28:54:ObjectDetectionYOLOv5-6.2: script to work.
17:28:56:ObjectDetectionYOLOv5-6.2: Reading ObjectDetectionYOLOv5-6.2 settings.......done
17:28:56:ObjectDetectionYOLOv5-6.2: Installing module Object Detection (YOLOv5 6.2) 1.10.0 (Internal)
17:28:56:ObjectDetectionYOLOv5-6.2: Installing Python 3.7
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: Downloading Python 3.7 interpreter...BITS transfer failed. Trying Powershell....
17:28:56:ObjectDetectionYOLOv5-6.2: 'powershell' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: Download failed. Sorry.
17:28:56:ObjectDetectionYOLOv5-6.2: 'robocopy' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: '"C:\Program Files\CodeProject\AI\runtimes\bin\windows\python37\python.exe"' is not recognized as an internal or external command,
17:28:56:ObjectDetectionYOLOv5-6.2: operable program or batch file.
17:28:56:ObjectDetectionYOLOv5-6.2: Creating Virtual Environment (Shared)...done
17:28:56:ObjectDetectionYOLOv5-6.2: The system cannot find the path specified.
17:28:56:ObjectDetectionYOLOv5-6.2: Confirming we have Python 3.7 in our virtual environment...
17:28:56:Module ObjectDetectionYOLOv5-6.2 installed successfully.
17:28:56:
17:28:56:Module 'Object Detection (YOLOv5 6.2)' 1.10.0 (ID: ObjectDetectionYOLOv5-6.2)
17:28:56:Valid: True
17:28:56:Module Path: <root>\modules\ObjectDetectionYOLOv5-6.2
17:28:56:Module Location: Internal
17:28:56:AutoStart: True
17:28:56:Queue: objectdetection_queue
17:28:56:Runtime: python3.7
17:28:56:Runtime Location: Shared
17:28:56:FilePath: detect_adapter.py
17:28:56:Start pause: 1 sec
17:28:56: Parallelism: 0
17:28:56:LogVerbosity:
17:28:56: Platforms: all,!raspberrypi,!jetson
17:28:56:GPU Libraries: installed if available
17:28:56:GPU: use if supported
17:28:56:Accelerator:
17:28:56:Half Precision: enable
17:28:56:Environment Variables
17:28:56:APPDIR = <root>\modules\ObjectDetectionYOLOv5-6.2
17:28:56:CUSTOM_MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\custom-models
17:28:56:MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\assets
17:28:56:MODEL_SIZE = Medium
17:28:56:USE_CUDA = True
17:28:56:YOLOv5_AUTOINSTALL = false
17:28:56:YOLOv5_VERBOSE = false
17:28:56:
17:28:56:Error trying to start Object Detection (YOLOv5 6.2) (detect_adapter.py)
17:28:56:Error is: An error occurred trying to start process 'C:\Program Files\CodeProject\AI\runtimes\bin\windows\python37\venv\Scripts\python' with working directory 'C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2'. The system cannot find the file specified.
17:28:56: at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at CodeProject.AI.Server.Modules.ModuleProcessServices.StartProcess(ModuleConfig module, String installSummary)
17:28:56: Please check the CodeProject.AI installation completed successfully
17:28:56:Module ObjectDetectionYOLOv5-6.2 started successfully.
17:28:56:Installer exited with code 255
17:28:56:Call to run Install on module ObjectDetectionYOLOv5-6.2 has completed.
17:30:04:Update ObjectDetectionYOLOv5-6.2. Setting AutoStart=true
17:30:04:Restarting Object Detection (YOLOv5 6.2) to apply settings change
17:30:04:ObjectDetectionYOLOv5-6.2 has left the building
17:30:04:
17:30:04:Module 'Object Detection (YOLOv5 6.2)' 1.10.0 (ID: ObjectDetectionYOLOv5-6.2)
17:30:04:Valid: True
17:30:04:Module Path: <root>\modules\ObjectDetectionYOLOv5-6.2
17:30:04:Module Location: Internal
17:30:04:AutoStart: True
17:30:04:Queue: objectdetection_queue
17:30:04:Runtime: python3.7
17:30:04:Runtime Location: Shared
17:30:04:FilePath: detect_adapter.py
17:30:04:Start pause: 1 sec
17:30:04: Parallelism: 0
17:30:04:LogVerbosity:
17:30:04: Platforms: all,!raspberrypi,!jetson
17:30:04:GPU Libraries: installed if available
17:30:04:GPU: use if supported
17:30:04:Accelerator:
17:30:04:Half Precision: enable
17:30:04:Environment Variables
17:30:04:APPDIR = <root>\modules\ObjectDetectionYOLOv5-6.2
17:30:04:CUSTOM_MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\custom-models
17:30:04:MODELS_DIR = <root>\modules\ObjectDetectionYOLOv5-6.2\assets
17:30:04:MODEL_SIZE = Medium
17:30:04:USE_CUDA = True
17:30:04:YOLOv5_AUTOINSTALL = false
17:30:04:YOLOv5_VERBOSE = false
17:30:04:
17:30:04:Error trying to start Object Detection (YOLOv5 6.2) (detect_adapter.py)
17:30:04:Error is: An error occurred trying to start process 'C:\Program Files\CodeProject\AI\runtimes\bin\windows\python37\venv\Scripts\python' with working directory 'C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv5-6.2'. The system cannot find the file specified.
17:30:04: at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at CodeProject.AI.Server.Modules.ModuleProcessServices.StartProcess(ModuleConfig module, String installSummary)