Could somebody please explain to me the difference between the red and green boxes which highlight motion events when viewed through iVMS-4200? 1 of 4 cameras shows a red box, with the others being green.
My research indicated that it might be (Green = Dynamic analysis for motion enabled) and (Red = disabled) - but my 4 cameras are configured identically as shown below. I've tried toggling the motion detection on/off, as with the dynamic motion in-case it was a 'stuck' setting, but this had no effect.
I'm only using intrusion detection.
Red:
Green:
Motion Setup (x 4 identical):
Intrusion Setup (x 4 identical):
Thank you
My research indicated that it might be (Green = Dynamic analysis for motion enabled) and (Red = disabled) - but my 4 cameras are configured identically as shown below. I've tried toggling the motion detection on/off, as with the dynamic motion in-case it was a 'stuck' setting, but this had no effect.
I'm only using intrusion detection.
Red:
Green:
Motion Setup (x 4 identical):
Intrusion Setup (x 4 identical):
Thank you