Ivms 4200

[lance199999]

Main view cameras to small please help

 

[lance199999]

How do I fix this

 

[C0m4]

Never seen such thing (250+ hikvision installs)

Sent from my SM-A720F using Tapatalk

 

[lance199999]

I'm not sure what to do

 

[inforlonghaul]

Main view cameras to small please help

In the Tool> System Configuration > Image section, is View Scale set to 'Full Screen'?

 

[lance199999]

I tried that this is what happens that didn't fix the issue. If I log into nvr by IP address image is good and as lo from the nvr to Tv is perfect.

 

[cctvnerd]

Do you use hardware acceleration in iVMS?

 

[lance199999]

Not sure what that is I reinstalled it and same thing so if it's not set on by factory then no

 

[cctvnerd]

What version of iVMS are you using?

 

[vector18]

Try changing the resolution of ur PC screen

 

[lance199999]

Latest version and resolution is 4k what should it be set at.

 

[vector18]

Just lower it to 1920x1080 and watch what happens

 

[vector18]

Reboot the PC after you change it though

 

[cctvnerd]

What you mean with latest version? I use for example 2.6.1.6 build 20170426

Check these settings in the systems configuration. Try to uncheck....

 

[marku2]

I upgraded to that version and had no veiwable camera in its appropriate view I would slide any camera over to single screen and sat there black I could see alerts on the tool bar went back to my original version everything worked ok I have windows 10 64 bit so not sure about that version something not quite right and all for a doorbell and intercom and heat map im staying away

 

[cctvnerd]

Im sorry that you experienced that. But again please told me your Version that is working fine on your side. And did you try to uncheck these options ? They should be there since couple versions...

 

[marku2]

This one came with the nvr cd

 

[marku2]

What you mean with latest version? I use for example 2.6.1.6 build 20170426

Check these settings in the systems configuration. Try to uncheck....
View attachment 20451

Mine is a bit different that's the one where device tab became server tab

 

[cctvnerd]

For these settings i mentioned you have to click on the image tab in the system configuration. the screenshot you did was from the general tab

 

[marku2]

Sorry here you go