IVMS4200 SUB stream DS-96128NI-F24 with ONVIF device

[kamikaza_t]

Hi to all,
I just install IVMS 4200 connected with 2 x NVR DS-96128NI-F24.
On DS-96128NI-F24 i just have connected ONVIF camera (Acti/Pelco/Jvc).
Main stream and recording is fine.

My problem is how to get Sub stream from NVR for ONVIF camera in live mode view.
Because I have around 120 cameras I have problem wen I open more than 15 cameras CPU and RAM are on 100% only is allowed to get main stream.
When I check "Auto Change stream type" in configuration of IVMS, after that I can't to get stream from NVR.

Any ideas how to solve this....
Thanks in advanced...

 

[Ardes Bangun]

Dear Kamikaza,

I have same problem with you ( i think and i hope)

My PC will have problem if running FULL HD for 32camera
so i change default live view in software IVMS4200

and now, my PC can run 16camera normally

set from kamera first,
direct access to camera using ip address internet explorer
change: MAIN STREAM and EXTRA STREAM/ SUB STREAM (maks 512 or 256kb only)


after that, going to IVMS 4200
Devices management
Group
choose NVR you want
Encoding Channel
select 1 camera on right side windows
MODIFY
Video Stream =
1. Main Stream
2. Sub Stream (256-512 kbps) i think enough for thumbnail preview
3. Third
4. Virtual
Klik OK for FINISH

Hope can solve you problem