IVS issues

J

JFire

Getting the hang of it
Aug 26, 2015
406
40
Pittsburgh, PA
I installed a new camera set up my tripwires and i get nothing. They dont display on the nvr nor do i get alerts. I went to the nvr web gui and set them up there and still nothing. Ill do so in the camera but before i do that i am curious....im assuming the camera over rules the settings in the nvr and web gui over rides the nvr itself? If i set everything in the camera what do i do to the nvr/web gui?

Im having no issues with the other camera and ivs.

Sent from my SM-G928T using Tapatalk
 
Camera Model and Firmware version?

My NVR is not picking up any IVS from my recessed PTZ; waiting for a firmware update.
 
  • Like
Reactions: hmjgriffon
This older ones should have no problem with nvr ivs. What for a nvr are you using? Firmware? Do you see a tripwire in the live video of the webif from nvr or cam?
 
NVR is 4108P i can see the tripwires in the in the event screen web gui. They don't show on my preview view or on the nvr monitor. My other camera, same model shows the tripwires and functions as it should. NVR version is 3.201

Sent from my SM-G928T using Tapatalk
 
Do your cams or nvr have smart plan? I don´t think so, but if the cam has smart plan and the nvr not, the nvr firmware has problems with this. Or maybe the nvr scheduler options are wrong?
 
TVT73 said:
Do your cams or nvr have smart plan? I don´t think so, but if the cam has smart plan and the nvr not, the nvr firmware has problems with this. Or maybe the nvr scheduler options are wrong?
Click to expand...
Both cameras and nvr support smart functions. I have to cameras same model. 1 works perfectly the 2nd is not working with ivs outside of the event screen. I can set the trip wires but then they never show up. I've rebooted the nvr. I've powered down the camera. Factory reset maybe?

Sent from my SM-G928T using Tapatalk
 
Well oddly enough im getting alerts from cam 2 in gdmss. Still no visible tripwires but the alerts are coming in. Ill take it for now.

Sent from my SM-G928T using Tapatalk
 
  • In Smart PSS, you can disable showing the IVS rules in live view. Exit SmartPSS, and relaunch, and it will return to default "show IVS rules"
  • I don't use gDMSS.
  • I do use gDMSS Plus on my android. IVS rules don't show in Live Preview.
  • In SmartPSS, and using the web interface of the NVR in a browser, they both show the IVS rules. And they show in Playback on both devices.
Just in case that gives you some clues to run with....

FastB
 
@Fastb i have one camera just fine. Its this second camera thats not cooperating. No lines show but yet lastnight i was getting alerts. I had this camera set up inside and set some functions from the camera itself. I didnt have the time to log into the camera itself and change it from that end.

Sent from my SM-G928T using Tapatalk
 
one shows IVS, the other cam doesn't. But both send alerts. That's the strange part.
"Alerts" is where? NVR display? NVR web UI?
for gDMSS, which doesn't support "push notification", you wouldn't get "alerts", but instead, emails. [Push notification requires gDMSS Plus]

If "alerts" means emails, then we could discuss who sends the email - the NVR, Cam A, Cam B.

JFire said:
I had this camera set up inside and set some functions from the camera itself. I didnt have the time to log into the camera itself and change it from that end.
Click to expand...
I'm not sure I followed that.
1) You "set some functions from the camera itself"
2) But you "didnt have the time to log into the camera itself and change it from that end."
1 & 2 seem contradictory. Unless stmt 1 doesn't include IVS "functions"

IVS with Live Preview has some value. For me, the real value is seeing IVS rules, Object boxes, and flashing red tripwire/intrusion when in Playback mode.

Good luck,
Fastb
 
@Fastb i originally set functions in the camera some time ago. Since i have poe nvr to access camera i have to run a cable from pc to nvr. Wife hates that btw.

I did just that and the scheduling was all messed up. I fixed the scheduling and was able to see tripwires on live view. Still no wires on nvr display but i am getting alerts.

Sent from my SM-G928T using Tapatalk
 
You must log in or register to reply here.
Top Bottom