IVS works till midnight, than its over

M5F10

M5F10

n3wb
Dec 22, 2016
27
5
I've a problem and I don't know how to fix it.
I've a SD95230U-HNI It's a dome camera with 30X zoom and PTZ. I've some of them, all the same problem.
Problem:
I can program IVS only on the camera, not on the NVR. It works perfect.
In the setup I set to all day from 00:00:00 to 23:59:59.
Every time at midnight : 23:59:59 it stops working. The IVS lines are still there. To have it working I must go to webUI of the camera to IVS and only push save. It works again till midnight. I've to do the same procedure to get it working.

What can I do to fix it?
 
reset the camera to defaults and try again.. seems more you monkey with the camera the higher the chances are of getting a funky config. Resetting to defaults and manually reconfiguring it right the first time seems to fix it usually.
 
  • Like
Reactions: M5F10
How can I reset the camera only with the hardware or can I take default in the webUI to reset?
A reset on the camera is not so easy, because my camera's are all mounted on the wall.
 
the WebUI
Screenshot 2017-01-13 09.06.01.png
 
nope, still at midnight it stops. Could this be a bug.

Verstuurd vanaf mijn SM-G930F met Tapatalk
 
Try with two periods such as
00:00 to 07:00
23:00 to 24:00

That works for me. Normally one period can't be over midnight. It will be case if they use cron job for scheduling.
 
no, it doesn't work. Can it be the time which is controlled via web?

Verstuurd vanaf mijn SM-G930F met Tapatalk
 
At beginning my settings were working perfectly. After some changes, I got alerts randomly. Just rebooted NVR. It seems like the problem is fixed. Will see in one or two days.
 
I think that I"l reboot every day at 24:00 hour. After reboot I think it will work. I give it a try. Is rebooting bad for the equipment?
Anybody an other solution?
 
You must log in or register to reply here.
Top Bottom