Yes to tony for on
ff network. How do I set BI Ip to static.
It's a matter of going into network settings on the PC, looking at its status to see what was assigned by DHCP, write that down, go into the Ethernet adapter's IPv4 properties, type in that written-down IP, use subnet mask of 255.255.255.0, gateway IP will be your router's LAN IP, primary/preferred DNS will be same as gateway, click on "OK".
Log into your router and reserve that IP that you set above for the BI server.
If too much, use your google fu to look up how-to change the IP on your particular Windows flavor.
My external Ip never changes. And I have to go back to BI local and use the network wizard to gain remote access again.
I just use the bi app with the remote Ip + the forwarded port is this the same as
ddns?
Since your WAN never changes (static) then you don't need DDNS.
I do use UPnp and then use the box “ add bi”
As
@Mike stated above, it would be better to disable uPNP in the router and manually forward BI's port to the BI server's static IP.
The BEST scenario would be to avoid port forwarding and set up VPN on a router.