looney2ns
IPCT Contributor
That's the mother of PTZ's !
Lets talk next level PTZ's with Laser IR
- Thread starter bigredfish
- Start date
For SD6AL433XA-HNR, was there ever a test to show that smart IR could dynamically change the focus of the IR laser? Or is it only manually settable?
tech101
Known around here
@bigredfish Wanted to share here for the laser PTZ some HTTP command that @wittaj was able to figure out how to manually throw the laser into setting angel beam pattern and brightness from SmartIR mode without going thru the entire WebGUI. Thank you so much once again @wittaj
Where 5 is the Beam Angle of the laser & 83 is the light brightness of the laser. The mode can also be switch back to IR by simply replacing Mode=Manual to Mode=SmartIR
Code:
http://admin:password@192.168.1.108/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].NearLight[0].Angle=5&NearLight[0].Light=83&Lighting[0][0].Mode=ManualWhere 5 is the Beam Angle of the laser & 83 is the light brightness of the laser. The mode can also be switch back to IR by simply replacing Mode=Manual to Mode=SmartIR
Last edited:
This was probably the thread that makes me disappointed with the SD4A425DB-HNY 1/2.8
MiniPTZ. How can you be satisfy with SD4A425DB-HNY after watching the videos in this thread?
MiniPTZ. How can you be satisfy with SD4A425DB-HNY after watching the videos in this thread?
tech101
Known around here
So I now have some of the far preset calling for this http call, as soon I select the preset which now sets the laser angel to where ever you want..
View attachment TE-135.20221220_000000_1.mp4
View attachment TE-135.20221220_000000_1.mp4