looking for JPEG and MJPEG URL for the DS-2CD2542FWD-IS

[dannieboiz]

I use Imperihome to watch some of my camera on multiple tablets and it's all connecting through BlueIris URL at the moment. I want to take the load off the Blue Iris server by having them go straight to the camera but I'm having the most difficult time getting it to work. On the older HikVision, I can use
<IP Address: port>/Streaming/Channels/2/preview for MJPEG and <IP Address: port>/Streaming/Channels/1/picture/ for JPEG just fine it'll ask for a PW and once I log in it works.

However, on the newer 2542 I can't do this. I get the error below.

Access Error: 404 -- Not Found
Request Refuse: cgi integrate function is disabled.

 

[alastairstevenson]

Request Refuse: cgi integrate function is disabled.

Presumably you are using 5.5.x firmware.
A new feature in the camera web GUI is that some of the services that used to be always on can be enabled and disabled, with a default of disabled.

But whether MPEG is still supportted I don't know - I'd be surprised if it was.

*edit* Setting to enable here :

 

[dannieboiz]

that's the firmware I'm on.

U think it have anything to do with this section?

 

[alastairstevenson]

Do you have Hikvision-CGI enabled?

 

[dannieboiz]

No it's disable

 

[dannieboiz]

So I enabled the cgi setting and got jpeg stream to work but Mjpeg is still not working/