Loryta T2831TM-AS sub stream url

L

lcam

Getting the hang of it
Aug 29, 2018
172
38
US
Does anyone know the substream url for this camera?
 
I'd be surprised if it's not:

Code: 
rtsp://username:password@Camera-IP:554/cam/realmonitor?channel=1&subtype=1


NOTE: two "/" after "rtsp:"
 
lcam said:
Thanks. I should have been more specific as I needed this for Blue Iris and was able to use "/cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif"
Click to expand...

If I had known about BI (I use BI) or you'd posted in the BI forum, I would have suggested you put in the cam's IP, username & password and click on "Find/Inspect" button; BI would have very likely configured it properly for you.

Glad you're up and running! ;)
 
  • Like
Reactions: Flintstone61 and sebastiantombs
TonyR said:
If I had known about BI (I use BI) or you'd posted in the BI forum, I would have suggested you put in the cam's IP, username & password and click on "Find/Inspect" button; BI would have very likely configured it properly for you.

Glad you're up and running! ;)
Click to expand...
It leaves the sub profile blank when using the find/inspect for some reason. After manually entering it then it works fine. Thanks for your help.
 
All this talk about pulling down stuff out of a substream could make a guy wonder what forum he stumbled into. :smash:
 
You must log in or register to reply here.
Top Bottom