So my cam typically does great with focus both day and night, but the last few days it has lost focus, causing me to miss a lot of plates. Unfortunately during one of these moments, we had some issues and I was not able to provide the plate number. I am wondering if there is a way to periodically send specific zoom and focus settings to the cam throughout the day to be sure it is set where it should be. I know the daylight utility would do this, but I don't want to use it for day/night settings. Does anyone have any other thoughts or suggestions?
I am only zoomed at 1020 , so the zoom isn't too close. I figured that might have been the issue, but it has been fine for a good while. TIA for all input.
I am only zoomed at 1020 , so the zoom isn't too close. I figured that might have been the issue, but it has been fine for a good while. TIA for all input.