Hi Guys
All the hardware is UK stock.
I have had my set-up for a couple of weeks and I have a problem and I think it may have something to do with my settings. This concerns both my cameras. DS-2CD2542FWD-IS located at the front door and DS-2CD2342WD-I in the garden
I have noticed two things. When someone comes to my door or i go to the garden the picture freezes occasionally. I can see a frozen picture of the person standing there and then it jumps once the person is not in view of the camera any more. This is during live view. This happens to both cameras.
Second problem is similar to the first. When I go to play previous footage, the same thing happens. One minute the person is nowhere to be seen, and the next it has jumped completely and they are standing at my door or i only see a second of them. I don't see their car parking up or them walking to my door just them standing there. Same thing happens to my garden camera.
I am using cat6 solid copper cable.
My setting for the both cameras are as below only the turret has no audio.
Stream Type - Main stream normal
Video Type - video&audio
Resolution - 2688*1520
Bitrate Type - variable
Video Quality - highest
Frame Rate fps - 20
Max. Bitrate - 6144kbps (greyed out)
Video Encoding - h264
H.264+ - On
I only have two cameras attached to my 4 channel nvr DS-7604NI-E1 / 4P/A.
I understand if more then one camera is attached to the DS-7604NI-E1 / 4P/A it will only record at 1080p is this correct?
Any help would be appreciated.
All the hardware is UK stock.
I have had my set-up for a couple of weeks and I have a problem and I think it may have something to do with my settings. This concerns both my cameras. DS-2CD2542FWD-IS located at the front door and DS-2CD2342WD-I in the garden
I have noticed two things. When someone comes to my door or i go to the garden the picture freezes occasionally. I can see a frozen picture of the person standing there and then it jumps once the person is not in view of the camera any more. This is during live view. This happens to both cameras.
Second problem is similar to the first. When I go to play previous footage, the same thing happens. One minute the person is nowhere to be seen, and the next it has jumped completely and they are standing at my door or i only see a second of them. I don't see their car parking up or them walking to my door just them standing there. Same thing happens to my garden camera.
I am using cat6 solid copper cable.
My setting for the both cameras are as below only the turret has no audio.
Stream Type - Main stream normal
Video Type - video&audio
Resolution - 2688*1520
Bitrate Type - variable
Video Quality - highest
Frame Rate fps - 20
Max. Bitrate - 6144kbps (greyed out)
Video Encoding - h264
H.264+ - On
I only have two cameras attached to my 4 channel nvr DS-7604NI-E1 / 4P/A.
I understand if more then one camera is attached to the DS-7604NI-E1 / 4P/A it will only record at 1080p is this correct?
Any help would be appreciated.