Hi,
I have a budget camera from China that I want to use with my NVR which is a Dahua clone from Security Camera King. I changed the ip of the camera to work with my network address 192.168.0.1. But when I plug into my network no video. The choices on my NVR as far as settings go are the following: Private/port37777;General no port listed;PSIA/port 80;ONVIF/Port 80;Arecont/80;Panasonic,Sony,Axis, Dynacolor, and Samsung all port 80.
I've tried a number of combinations but no go.i thought the obvious setup would be Private with port 37777 but no... Has anyone had this problem? What am I missing?
One more question should the Video Format be 50Hz or 60Hz?
Thanks,
Tubac
I have a budget camera from China that I want to use with my NVR which is a Dahua clone from Security Camera King. I changed the ip of the camera to work with my network address 192.168.0.1. But when I plug into my network no video. The choices on my NVR as far as settings go are the following: Private/port37777;General no port listed;PSIA/port 80;ONVIF/Port 80;Arecont/80;Panasonic,Sony,Axis, Dynacolor, and Samsung all port 80.
I've tried a number of combinations but no go.i thought the obvious setup would be Private with port 37777 but no... Has anyone had this problem? What am I missing?
One more question should the Video Format be 50Hz or 60Hz?
Thanks,
Tubac
Last edited: